To download product software, scroll down or search by product.
NotifEye™ USB Driver and Gateway Application Download
The following download will install the NotifEye™ Driver and Gateway application on your computer. This application is needed in order for your computer to communicate with the NotifEye online wireless sensors portal. Follow the detailed instructions in your Manual to successfully install the USB Driver and Application.
Note: The NotifEye Gateway application needs to be running on your computer in order for the sensor data to be transmitted to the online system. If the gateway is not running, your sensor data is not being recorded and notifications based on sensor data cannot be sent from the system.
(Windows 8, Windows 7 or Windows Vista is required to run the NotifEye USB Gateway)
TravAlert Plus™ Data Logger Software Download
IMPORTANT- All users should update their software to the current version to ensure compatibility with data logger firmware. Follow the steps below to upgrade existing software.
Click on the TravAlert Plus Data Logger Software link below to download the software. You will need to register your software before being able to continue the download.
*This installation is for both 32-bit and 64-bit Windows operating systems. If you are installing to Windows Vista, Windows 7 or Windows 10, you will need Administrator privileges under User Account Control.
For installation help, please refer to the Quick Start Guide that shipped with your hardware.
GL100 Manager Download
Click on the GL100 Manager link below to download the updated file to your computer, then follow the instructions below.
This installation is for both 32-bit and 64-bit Windows operating systems. If you are installing to Windows Vista or Windows 7, you will need Administrator privileges under User Account Control.
Be sure to view the ReadMe file at the end of this installation. Do not connect the USB adaptor to your computer until after the GL100 Manager installation is completed.
GL100 1-Wire USB Drivers Installation Notes:
If drivers do not install automatically:
This installation includes the 1-Wire Drivers for Microsoft Windows 32-bit and 64-bit systems.
After installing the GL100 Manager, open the Driver folder located by default in "C:\Program Files\Cooper-Atkins\GL100 Manager 4.1\Drivers". If you chose a different installation folder then direct the installer to that location instead.
Open the folder for your system, either 32-bit or 64-bit, and run the driver installation program.
The MFM300 Toolbox is a PC application (does not run on Apple, Linux, Unix machines) that is a set of utilities with which the user may (using the 9360 or 9362 communication cable) install MFM300 firmware updates, change the five USER refrigerants as needed, and upload stored snapshots and GL100 data from the MFM300. In addition, the MFM300 Toolbox performs direct GL100 datalogger mission handling, graphing and printing.
* New - Updated refrigerants to include R-407A, NU-22, NU-22B
Once you have downloaded the file make sure you do the following:
- Close all other applications
- Double-click on the MFM300 Toolbox
- The installation Wizard will direct the remainder of the download