Saturday, November 18, 2017
 

Software Downloads

To download product software scroll down or search by product.
Choose:  

 

NotifEye™
 

NotifEye™ USB Driver and Gateway Application Download

The following download will install the NotifEye™ Driver and Gateway application on your computer. This application is needed in order for your computer to communicate with the NotifEye online wireless sensors portal. Follow the detailed instructions in your Manual to successfully install the USB Driver and Application.

Note: The NotifEye Gateway application needs to be running on your computer in order for the sensor data to be transmitted to the online system. If the gateway is not running, your sensor data is not being recorded and notifications based on sensor data cannot be sent from the system.

    NotifEye USB Driver and Gateway Application Download

(Windows 8, Windows 7 or Windows Vista is required to run the NotofEye USB Gateway.)

 

TravAlert Plus ™

TravAlert Plus Data Logger Software Download 

Click on the TravAlert Plus Datalogger Software link below to download the TravAlert Plus Datalogger Software to your computer, then follow the instructions below.

   TravAlert Plus Data Logger Software Download

This installation is for both 32-bit and 64-bit Windows operating systems. If you are installing to Windows Vista, Windows 7 or Windows 10, you will need Administrator privileges under User Account Control.

Do not connect the USB adaptor to your computer until the TravAlert Plus Datalogger Software installation is completed.

For further information, please download the user manual by clicking on the link below:

  TravAlert Plus Data Logger User Manual

GL100

GL100 Manager Download

Click on the GL100 Manager link below to download the updated file to your computer, then follow the instructions below.

GL100 Manager Rev 4.2

This installation is for both 32-bit and 64-bit Windows operating systems.

If you are installing to Windows Vista or Windows7 you will need Administrator privileges under User Account Control.

Be sure to view the ReadMe file at the end of this installation. Do not connect the USB adaptor to your computer until after the GL100 Manager installation is completed.

GL100 1-Wire USB Drivers Installation Notes:
================================================================

If drivers do not install automatically:

This installation includes the 1-Wire Drivers for Microsoft Windows 32-bit and 64-bit systems.

After installing the GL100 Manager, open the Driver folder located by default in "C:\Program Files\Cooper-Atkins\GL100 Manager 4.1\Drivers". If you chose a different installation folder then direct the installer to that location instead.

Open the folder for your system, either 32-bit or 64-bit, and run the driver installation program.

Older Revisions

HACCP Manager Rev 3.1.0



MFM300

The MFM300 Toolbox is a PC application (does not run on Apple, Linux, Unix machines) that is a set of utilities with which the user may (using the 9360 or 9362 communication cable) install MFM300 firmware updates, change the five USER refrigerants as needed, and upload stored snapshots and GL100 data from the MFM300. In addition, the MFM300 Toolbox performs direct GL100 datalogger mission handling, graphing and printing.

MFM300 Toolbox v2.1.0.5

* New - Updated refrigerants to include R-407A, NU-22, NU-22B

Once you have downloaded the file make sure you do the following:

  • Close all other applications

  • Double-click on the MFM300 Toolbox

  • The installation Wizard will direct the remainder of the download

 
© 2009-2017 Cooper-Atkins Corporation. All Rights Reserved.