Tuesday, November 21, 2017
 

TempTrak ISO17025 Calibrated Equipment

The Centers for Disease Control (CDC) provides guidance on appropriate vaccine storage and handling practices and publishes a Vaccine Storage & Handling Toolkit.

This guidance is intended as the approved standard of care for all public and private sector vaccine providers.

The CDC recommends that monitoring devices measuring temperature in the storage units should be calibrated to conform to ISO17025 standards. This calibration should provide a Certificate of Calibration that includes specific information such as documented uncertainty, calibration pass/fail results, device name and model number.

Cooper-Atkins offers factory calibration of transmitters and probes that conforms to ISO17025 standards. This hardware is accompanied by a Certificate of Calibration for the transmitter and the probe.

Please reference our ISO17025 Calibrated Hardware Spec Sheet HERE


SysCal™ On-site Calibration (in situ)
The SysCal™ process was designed for field calibration of NIST traceable TempTrak transmitters and solid simulator probes.
The process calibrates the transmitter and probe together as a system in place within the customer use environment. There is no
longer a need to send simulator probes back to the factory for recalibration. This in turn saves you money and eliminates any down time.

The SysCal calibration process is compliant to ISO/IEC Standard 17025:2005 and is traceable through NIST or other National Standards Institutes when performed by a trained Cooper-Atkins technician.

Please reference our SysCal Spec Sheet HERE
    

TempTrak Calibration Certificate Storage
TempTrak now provides electronic storage of Cooper-Atkins Certificates of Calibration. During a regulatory inspection, you can pull up the necessary calibration records from within TempTrak to demonstrate compliance in real-time.

In addition to providing immediate access to electronic copies of the Certificates of Calibration, this feature also provides notice to customers about upcoming calibration needs based on past calibration history. This ensures that customers are informed about calibration schedules and helps them remain in compliance in the future.

 

CLICK HERE TO REQUEST MORE INFORMATION OR SET UP A DEMO.

 

 
© 2009-2017 Cooper-Atkins Corporation. All Rights Reserved.